Skip to content

Changes

Page history
Update tutorial service enocean authored by Katharina Polanec's avatar Katharina Polanec
Show whitespace changes
Inline Side-by-side
tutorial-service-enocean.md
View page @ 66e39e2c
......@@ -174,12 +174,12 @@ By default the FSVA-230V does not send any confirmation telegrams, therefore the
1. Hold both buttons (ON/OFF and LRN/CLR) pressed while plugging the device into the socket. If the LED is on for 2 seconds, the telegrams are enabled. If the LED is on for 0,5 seconds, the telegrams are disabled (default setting).
2. After step 1 has been executed, the IDs should be visible within FREDOSAR.
3. In order to register the FSVA-230V so that commands can be transmitted to the device, hold the LRN/CLR button pressed for 0,5 seconds. The LED turns on. Press the ON/OFF button two times, the LED blinks two times.
4. Send a package from FREDOSRA to the device, the LED turns off.
3. In order to register the FSVA-230V, so that commands can be transmitted to the device, hold the LRN/CLR button pressed for 0,5 seconds. The LED turns on. Press the ON/OFF button two times, the LED blinks two times.
4. Send a package from FREDOSAR to the device, the LED turns off.
5. The FSVA-230V is registered for FREDOSAR.
In order to delete all registrations, hold the LRN/CLR button pressed for 3 seconds. The LED blinks rapidly. Afterwards, hold the ON/OFF button pressed for 5 seconds. The LED turns off and the device has been reset to the default settings.
For further information the datasheet can be found here: <https://www.eltako.com/fileadmin/downloads/de/_bedienung/FSVA-230V_30100003-2_dt.pdf>
For further information, the datasheet can be found here: <https://www.eltako.com/fileadmin/downloads/de/_bedienung/FSVA-230V_30100003-2_dt.pdf>
## How to add a new Device/ EEP Packet
......