| ... | ... | @@ -176,7 +176,7 @@ By default the FSVA-230V does not send any confirmation telegrams, therefore the |
|
|
|
2. After step 1 has been executed, the IDs should be visible within FREDOSAR.
|
|
|
|
3. In order to register the FSVA-230V, so that commands can be transmitted to the device, hold the LRN/CLR button pressed for 0,5 seconds. The LED turns on. Press the ON/OFF button two times, the LED blinks two times.
|
|
|
|
4. Send a package from FREDOSAR to the device, the LED turns off.
|
|
|
|
5. The FSVA-230V is registered for FREDOSAR.
|
|
|
|
5. The registration is finalized.
|
|
|
|
|
|
|
|
In order to delete all registrations, hold the LRN/CLR button pressed for 3 seconds. The LED blinks rapidly. Afterwards, hold the ON/OFF button pressed for 5 seconds. The LED turns off and the device has been reset to the default settings.
|
|
|
|
For further information, the datasheet can be found here: <https://www.eltako.com/fileadmin/downloads/de/_bedienung/FSVA-230V_30100003-2_dt.pdf>
|
| ... | ... | |
