tutorials/getting-started-with-enocean.md

+# Tutorial: Getting started with EnOcean
+
+In this tutorial we will setup an ENOSAR Pi and configure it to retrieve EnOcean Messages sent from a button.
+
+## Components
+
+You need:
+- Raspberry PI 2 or 3 with sd card and powersupply
+- EnOcean Pi
+- Peha Swtich wall transmitter
+
+![IMG_20170228_112300](/uploads/c05d982145557dfcae49914fa32f3cc2/IMG_20170228_112300.jpg)
+
+### Preparation
+First mount the EnOcean Pi on the raspberry in the first pin
+
+![IMG_20170228_112344](/uploads/b9993f5c57d308c4f8e3b2af59ba1cc4/IMG_20170228_112344.jpg)
+
+Next download the [ENOSAR PI image from here](http://enopiimage) and write it to the sd card with you favourite tool, e.g. Win32 Disk Image
+
+![image](/uploads/63873629e590817d9991849de1541902/image.png)
+
+Insert the sd card an boot your pi.
+
+### Connect to the ENOSAR Pi
+